Driver Installation

🔌 For first-time computer connection, install the driver:

1️⃣ Download the software (link)

2️⃣ Check the video

3️⃣ Once installed, you're good to connect!

We recommend installing our driver on your computer to:

• Set the time of your logger

• Upload your temperature measurements manually. (For example in case you don’t have a Base Station, or you have no data plan for your Base Station)

• Configure your Base Station

Set the time

(Only applicable to first use)

1️⃣ Connect logger to computer using MICRO-USB B (not included).

2️⃣ Activate USB mode: press and hold "Start" and "Pause" buttons for 3 seconds; LED light turns orange (logger won't record).

3️⃣ Open browser, type "http://CC-L-A-”logger serial no” (for example, for logger 00000121, type "http://cc-l-a-00000121/".

4️⃣ Go to Advanced Settings, Press “Set Now and Save” or configure date and time manually. Press Save and disconnect.

5️⃣ After disconnecting the logger, the LED turns red (recording restarts after 5 seconds)

Start, pause, stop

Start measurement: press the Start button for 3 seconds

• Quick green LED flashes confirm the activation

• During recording the green LED will flash shortly once a minute

Pause measurement: press the Pause button for 3 seconds

• Quick red LED flashes confirm the pause mode

• As long as the logger is in pause mode, the red LED will flash once a minute

Stop measurement: press the Pause button for more than 8 seconds

• Quick red LED flashes will appear, hold the Pause button until the LED will turn off

• No more LED flashing, no more measurement

• Logger is not detectable by any Base Station

• This is the “hibernation” mode (for long term storage)

Flight and USB modes

USB mode: press and hold Start and Pause buttons for 3 seconds

• LED light turns orange

• No measurement

Enter flight mode: press and hold Start for 5 seconds

• LED flashes orange

• No radio transmission

Exit flight mode: press and hold Start for 3 seconds

• LED flashes green

• Radio transmission on

Manually upload your measurements

Download the measurement from the logger

1️⃣ Connect logger to computer using MICRO-USB B (not included).

2️⃣ Activate USB mode

3️⃣ Open browser, type "http://CC-L-A-”logger serial no” (for example, for logger 00000121, type "http://cc-l-a-00000121/".

4️⃣ Press download - the file will be stored on your PC.💾

5️⃣ After disconnecting the logger, the LED turns red (recording restarts after 5 seconds)

To upload to the cloud

1️⃣ Go to https://log.temperature.cloud/upload/

2️⃣ Click "Uploading", select your file. Let the data flow 📈!

3️⃣ Login to visualize & analyze.